Show Cluster Candidates - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:
Table of Contents

Advertisement

show cluster candidates

show cluster candidates
Use the show cluster candidates privileged EXEC command to display a list of candidate switches.
Syntax Description
detail
mac-address H.H.H.
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
This command is available only on the cluster command switch.
If the switch is not a cluster command switch, the command displays an empty line at the prompt.
The SN in the display means switch member number. If E appears in the SN column, it means that the
switch is discovered through extended discovery. If E does not appear in the SN column, it means that
the switch member number is the upstream neighbor of the candidate switch. The hop count is the
number of devices the candidate is from the cluster command switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show cluster candidates command:
Switch> show cluster candidates
Catalyst 2960 Switch Command Reference
2-310
show cluster candidates [detail | mac-address H.H.H.] [ | {begin | exclude | include} expression]
(Optional) Display detailed information for all candidates.
(Optional) MAC address of the cluster candidate.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
MAC Address
Name
00d0.7961.c4c0 StLouis-2
00d0.bbf5.e900 ldf-dist-128 WS-C3524-XL
00e0.1e7e.be80 1900_Switch
00e0.1e9f.7a00 Surfers-24
00e0.1e9f.8c00 Surfers-12-2 WS-C2912-XL
00e0.1e9f.8c40 Surfers-12-1 WS-C2912-XL
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Device Type
PortIf
WS-C2960-12T
Gi0/1
Fa0/7
1900
3
WS-C2924-XL
Fa0/5
Fa0/4
Fa0/1
|---Upstream---|
FEC Hops SN PortIf
FEC
2
1
Fa0/11
1
0
Fa0/24
0
1
0
Fa0/11
1
0
Fa0/3
1
0
Fa0/7
1
0
Fa0/9
OL-8604-04

Advertisement

Table of Contents
loading

Table of Contents