Show Fallback Profile - Cisco Catalyst 2960 Command Reference Manual

show fallback profile

show fallback profile
Use the show fallback profile privileged EXEC command to display the fallback profiles that are
configured on a switch.
Syntax Description | append
| begin
| exclude
| include
| redirect
| tee
expression
url
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines Use the show fallback profile privileged EXEC command to display profiles that are configured on the
switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show fallback profile command:
switch# show fallback profile
Profile Name: dot1x-www
------------------------------------
Description
IP Admission Rule : webauth-fallback
IP Access-Group IN: default-policy
Profile Name: dot1x-www-lpip
------------------------------------
Description
IP Admission Rule : web-lpip
IP Access-Group IN: default-policy
Profile Name: profile1
------------------------------------
Description
IP Admission Rule : NONE
IP Access-Group IN: NONE
Catalyst 2960 Switch Command Reference
2-346
show fallback profile [append | begin | exclude | include | { [redirect | tee] url} expression]
(Optional) Append redirected output to a specified URL
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
(Optional) Copy output to a specified URL.
(Optional) Copy output to a specified URL.
Expression in the output to use as a reference point.
Specified URL where output is directed.
Modification
This command was introduced.
: NONE
: NONE
: NONE
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04