Debug Matm Move Update - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug matm move update

To use this command, the switch must be running the LAN Base image.
Note
Use the debug matm move update privileged EXEC command to enable debugging of MAC
address-table move update message processing.
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SED
Usage Guidelines
The undebug matm move update command is the same as the no debug matm move update command.
Related Commands Command
mac address-table
move update
transmit}
show debugging
show mac
address-table move
update
OL-8604-04
debug matm move update
no debug matm move update
Modification
This command was introduced.
Description
Configures MAC address-table move update feature on the switch.
{receive |
Displays information about the types of debugging that are enabled.
Displays the MAC address-table move update information on the switch.
debug matm move update
Catalyst 2960 Switch Command Reference
B-19