Debug Platform Matm - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug platform matm

Use the debug platform matm privileged EXEC command to enable debugging of platform-dependent
MAC address management. Use the no form of this command to disable debugging.
Syntax Description
aging
all
ec-aging
errors
learning
rpc
secure-address
warning
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug platform matm command is the same as the no debug platform matm command.
Related Commands Command
debug matm
show debugging
OL-8604-04
debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address | warnings}
no debug platform matm {aging | all | ec-aging | errors | learning | rpc | secure-address |
warnings}
Display MAC address aging debug messages.
Display all platform MAC address management event debug messages.
Display EtherChannel address aging-related debug messages.
Display MAC address management error messages.
Display MAC address management address-learning debug messages.
Display MAC address management remote procedure call (RPC) related debug
messages.
Display MAC address management secure address learning debug messages.
Display MAC address management warning messages.
Modification
This command was introduced.
Description
Displays information about platform-independent MAC address management.
Displays information about the types of debugging that are enabled.
debug platform matm
Catalyst 2960 Switch Command Reference
B-35