Configuring Daylight Savings Time (Dst) - Lorex ECO 2 Instruction Manual

Configuring Daylight Savings Time (DST)

If your region observes Daylight Savings Time (DST), follow the instructions below to
configure your DVR to automatically update the time when the clock updates.
To enable automatic DST adjustments:
1 Click the DST Setup button.
2 Configure the following:
• Daylight Saving Time: Select Enable.
• Time Offset: Select the number of hours the system should move forward or backward when
DST occurs.
• Daylight Saving Time Mode: Select Week or Date. This allows you to select whether DST
should begin and end at the beginning of the week or on a specific date.
• Start Time, End Time: Enter when DST starts and ends.
3 Click Apply to save your settings.
DST Setup
Select Enable
Configure DST
Settings
21