Using The Mouse; Setting The Date And Time; Playback And Search; Using The Quick Menu - Lorex LHV2000 Series Quick Connection Manual

Using the mouse

1. Left-click:
• Click to open the Navigation Bar. Right-
click to close the Navigation Bar
• During split-screen display mode:
Double-click an individual channel to
view it in full-screen. Double-click again
to return to the split-screen display mode.
• While navigating menus: Click to
open a menu option.
2. Right-click:
• During live view: Right-click anywhere
on the screen to open the Quick Menu.
• Within system menus: Right-click to
exit menus.

Using the Quick Menu

Right-click to open the Quick Menu.
Select camera/live display view
Control PTZ cameras (not included)
Adjust color settings
View system information
Start/stop sequence mode
Disable beeping alarms
Search and playback recordings
Open manual recording controls
Open Main Menu
If the system is beeping after startup, the Ethernet cable may not be connected or the
system may not be connected to the Internet.
To stop the beeping:
1. Connect an Ethernet cable from the system to your router and restart the system. OR
2. Right click and click Disable Beep.
LHV2000_SERIES_QCG_EN.indd 2
Quick Connection Guide

Setting the date and time

In live view, right-click and click Main Menu.
1.
Log in using the system user name (default: admin) and
2.
1 2
password (default: 000000).
3.
4. Click General and select the Date&Time tab.
5. Click Apply to save changes.
It is important to set the correct time to ensure accurate time
stamps on video recordings.
LHV2000 Series
MPX HD Digital Video Surveillance Recorder

Playback and search

1. From live view, right-click and then click Search.
Log in using the system user name (default: admin)
2.
and password (default: 000000).
Use the calendar on the right to select the date to
3.
playback.
4. Use the drop-down menus to select the channels you
Click and
would like to playback. Click the display options
select Setting
( ) to playback multiple channels simultaneously.
Click inside the video bar to select the playback time.
5.
Playback starts immediately at the selected time.
Enter the current time and
select your time zone,
and click OK
Check DST to enable auto
Daylight Savings Time
updates
(Optional) Check NTP
to sync your system with
an Internet time server.
Click Manual Update to
instantly update the time
NOTE: A constant Internet
connection is required to
use NTP
30 Minutes
Select the day
to playback
Select channels
to playback
Click inside the bar to select a
playback time.
2/23/2015 11:47:10 AM