Remote Control (16 Channel) - Lorex LH120 Series Instruction Manual

Remote Control (16 Channel)

Remote Control (16 Channel)
The remote control is the secondary input
device for navigating the system's interface.
To use the remote control:
1 REC: Starts system recording.
• SEARCH: Opens the Search menu.
• Number Keys (1 -0): Opens the desired
channel in full screen mode. Press 1+0 for
channel 10, 1+1 for channel 11 etc.
Display Mode
• : Press repeatedly to change
viewing modes (i.e. press once to switch to
quad view (ch 1-4), press twice to view channel
5-8 etc.)
2x2 / 3x3 / 4x4 :
•
mode.
AUTO
• : Starts sequence view.
2 Navigation Cursors
cursors to navigate the menu.
ENTER
• : Confirms the selection in the menu.
• Press to access System Information during live
view.
3 MENU/ESC: Opens the Sub menu. Within
menus, the MENU button is used to exit the
menu.
• MUTE: Mutes audio channel during live
view and playback.
4 Playback Controls
FWD
• : During playback, press repeatedly to
increase playback speed
REW
• : During playback, press repeatedly to
increase reverse playback speed
PLAY
• :
• In live view, press to open the Record
Search Menu
• During playback, press to play video.
STOP Press to stop recording.
• :
• PAUSE/FRAME:
• Press to pause video during playback
• Press repeatedly to play frame by
frame during playback
10
Opens the window in grid
: Use the navigation
:
1
2
3
4
5
5 PTZ Controls:
• Z+/Z- : Adjust camera Zoom.
• F+/F- : Adjust camera Focus.
• I+/I-: Adjust camera Iris.
• PTZ: Opens the PTZ menu.
• LOCK: Locks the system screen.