Cleaning The Laminator Cartridge; Cleaning The Fan Filter - DataCard SR200 User Manual

Cleaning the Laminator Cartridge

Laminator cartridges can collect debris and dust during lamination and supply loading. Clean the
cartridge(s) every 1,000 cards.
1.
Open the laminator door.
2.
Press the cartridge release button and pull out the film cartridge.
3.
Remove the laminate film from the film cartridge.
4.
Clean the four metal guides with a Datacard® printhead cleaning swab (provided in the
Cleaning Kit. Refer to "Cleaning Supplies" on page
5. Replace the supply and take‐up spools on the cartridge. Refer to "Loading Top‐Side Laminate
Film" on page
6.
Replace the loaded laminator cartridge in the laminator until it clicks in position.
7.
Close the laminator door.

Cleaning the Fan Filter

The laminator fan filter keeps airborne particles from entering the
unit. Clean the filter regularly and replace it when the foam begins
to deteriorate.
1.
Remove the filter from the back of the laminator by pulling the
filter cover off.
2.
Clean the filter carefully using a vacuum cleaner. Hold the foam
filter in place to prevent it from being drawn into the vacuum.
3.
Reinstall the filter.
78
17.
109).
Maintaining Your Printer and Laminator