DataCard SR200 User Manual page 131

Error Code Displayed Message
10000302 Unable to establish communication
with the noncontact IC encoder.
10000303 An error has occurred during non‐
contact IC encoding data writing.
10000401 User program is not found.
10000403 An error is returned for the user
program.
10000501 Magnetic encoding program is not
found.
10000503 An error has occurred during
magnetic encoding data writing.
10000504 An error has occurred during
magnetic encoding data reading.
10000505 A magnetic encoding command
error has occurred.
10000601 End notification program is not
found.
10000603 An error is returned for the end
notification program.
10001001 Ink ribbon cannot be recognized.
10001002 Ink ribbon specification is incorrect.
10001003 IC encoder is not installed.
10001004 Magnetic encoder is not installed.
SR200 & SR300 Card Printers and LM200 & LM300 Laminators Users Guide
Solution
Contact your service provider.
Verify that the card specifications are correct.
Contact your service provider or application
provider.
Contact your service provider or application
provider.
Contact your service provider or application
provider.
Verify that the card specifications are correct.
Verify that the card specifications are correct.
Contact your service provider.
Contact your service provider or application
provider.
Contact your service provider or application
provider.
Make sure that the printer driver's ink setting
matches the installed ink ribbon.
Make sure that the printer driver's ink setting
matches the installed ink ribbon.
—
—
A-11