Closing The Status Monitor; Printer Status Tab - DataCard SR200 User Manual

Closing the Status Monitor

To close the Status Monitor:
1.
Click the red Close button.
2.
A prompt displays, asking if you want to close the Status Monitor. Click Yes.
Tips for Success
When you close the Status Monitor, communication between the printer and

driver becomes one way, with the printer driver sending cards to the printer.
To keep the Status Monitor running without viewing it, click Minimize.


Printer Status Tab

The Printer Status tab displays:
The type of ink ribbon and the approximate percentage

remaining.
The type of retransfer film and the approximate

percentage remaining.
The print counter and a Clear button to reset it to zero.

The printer name. If more than one printer is installed,

select the printer to work with using the Printer Selection
list. Click Update to search for additional SR200 & SR300
printers. The information displayed on the Status Monitor
changes automatically when you select another printer:
If the PC is network‐connected, only printers on the

same subnet as the PC can be found.
If the PC is USB‐connected, all printers connected to the PC will be found.

Card Quantity: Enough is displayed when cards are present in the hopper. None displays

when no cards are present.
If the printer is processing a job, the name of the document and the name of

the user displays in the Document Information area.
When the printer requires cleaning, the printer image displays Cleaning:

If a laminator is attached, laminator status displays under the printer status

(marked by the rectangle).
The current state of the printer, such as Ready. The icon changes color with different states.

Refer to the following table:
40 Printer and Laminator Settings