Others Tab
The Others tab provides the following for a USB‐connected
printer:
Controls for printing a test card. The printer creates one
test card, using the internal test pattern.
Controls for selecting a firmware file and sending it to the
printer. Update printer firmware only when your service
provider recommends it.
Version information for the Status Monitor.
Administrator button. Allows administrators to make
specific printer functions and Status Monitor actions
available to non‐administrative users.
Status Monitor Messages
When printer errors occur, they display on the Printer Status tab of the Status Monitor. Refer to
Appendix
A: "Status Monitor Messages" for a list of error messages and possible solutions.
Using the LCD Panel Menus
Use the LCD panel to view printer status and settings. You can change some printer settings and
perform certain functions (for example, cleaning the printer) using the LCD panel.
Most printer settings displayed on the LCD panel can be changed using either the printer
driver or the Status Monitor. Refer to "Introduction to Printer and Laminator Settings" on
page 26, Using the Status Monitor on page 38, and "Using the Status Monitor" on page
for instructions.
The LCD background color changes according to the printer's status. The background color is:
Bright green during power on.
Bright blue when the printer is operating normally, including when it is initializaing,
preheating, and printing cards.
Medium blue when recovering from errors.
Red on printer error.
SR200 & SR300 Card Printers and LM200 & LM300 Laminators User's Guide
38
51