Power Switch
Exhaust Fan
Intake Fan
Port for Cable Lock
Power Receptacle
The Left and Right Sides of the Laminator
Card Outlet
Card Stacker Attachment Slots
Filter Cover
Lift Area
Card Inlet
Infrared Port
8
Press the switch to power on the laminator.
Discharges heat from inside the laminator.
Draws air into the laminator for internal cooling.
Attach an optional cable lock in this location.
Plug in the power cord here.
Cards exit the laminator here.
Attach the card stacker here. As cards exit the laminator,
they collect in the card stacker.
Remove to access the air intake filter.
Use this area to lift the laminator when carrying it.
Printed cards enter the laminator here.
Sends or receives data via infrared communication to the
card printer.
Introduction