DataCard SR200 User Manual page 66

Menu Display Settings
Media Ink Type
YMCK

YMCK‐PO

YMCKK

YMCK‐UV

Film Type
1000

Card Thickness
Standard

Thin

Print YMC Level
Black Level
Black Mode
UV Level
PO Level
Retransfer Temp Level
Speed (front)
Speed (F‐UV)
Speed (back)
Speed (B‐UV)
MG Peel Mode
Standby Mode
Front Wait
Back Wait
Backside Cool
On

Off

56
Function
Displays the types of ink ribbon and retransfer film that
are loaded in the printer. Press the Next key to scroll to
the next media type.
Datacard supports YMCK, YMCKK and YMCK‐PO ink
ribbons. (The printer detects the type of ink ribbon; it
cannot be set.) Consult with your dealer about support
for YMCKUV ink ribbon.
Datacard retransfer film is available with 1000 frames
per roll.
Displays the thickness set using the Status Monitor.
Select Standard for 0.030 inch (0.75 mm) thick cards or
Thin for 0.010 inch (0.25 mm) thick cards. Set the card
hopper for this thickness also. Refer to "Adjusting Card
Thickness" on page 14.
Contact your dealer or service provider before using
0.010 inch (0.25 mm) thick cards.
Displays the value set using the Status Monitor.
Displays the value set using the Status Monitor.
Printer and Laminator Settings