Ventilation Clearance; Storage Environment For Supplies - DataCard SR200 User Manual

Ventilation Clearance

To make sure that there is proper ventilation for the printer and laminator, maintain minimum
clearance distances as described below.
Sides: 8 inches (200 mm)

Back: 4 inches (100 mm)


Storage Environment for Supplies

Follow these guidelines when storing ribbon, film, or laminate rolls:
Store supplies in their original packaging until you are ready to use them.

Select a location away from direct sunlight, with a temperature between 41°F and 77°F (5°C

and 25°C) with a maximum of 40%–60% relative humidity.
Do not store supplies in direct sunlight or high humidity locations.

The print ribbon maintains its quality for about one year. For optimal card quality, purchase

and store quantities that you can use up in less than a year.
The print ribbon and card stock might require secure storage and tracking. Follow your policy

for storing and tracking the supplies used to make cards.
Supply rolls must be at room temperature when they are installed in the printer and used. If

supplies are stored in a cooler environment than the printer, allow supplies to reach room
temperature before using.
If the printer will not be used for an extended period of time, remove supplies from the

printer and store them.
SR200 & SR300 Card Printers and LM200 & LM300 Laminators Users Guide B-3