DataCard SR200 User Manual page 49

For Windows 7 and WIndows Vista, right‐click the SR Printer

Status Monitor icon and select Run As administrator.
For Windows XP and 2000, right‐click the SR Printer Status

Monitor icon and select Run As In the Run As dialog box. Enter
the name and password for a user name with administrator
permissions.
The first time you start the Status Monitor on a PC

with the Windows Firewall enabled, a Windows
Security Alert dialog box may display. Click Unblock
to use the Status Monitor.
3.
To start the Status Monitor without administrator
permissions, click the icon to open it. A prompt indicates that
you cannot change settings. Click OK to continue.
4.
The Status Monitor window opens. Use these Status Monitor tabs to view or specify settings:
Printer Status tab (page

Printer Setting tab (page

Retransfer tab (page

Bend Remedy tab (page

Media Setting tab (page

5.
Tabs that allow you to change settings contain a Refresh button and an Update button. Click
Refresh to obtain current values from the printer and display them on the Status Monitor.
Click Update to send settings to the printer.
A "Would you like to refresh printer setting?" or "Would you like to change printer setting?"
dialog box displays. Click OK or Cancel to complete the procedure.
SR200 & SR300 Card Printers and LM200 & LM300 Laminators User's Guide
40)

42)

43)

44)

44)

Property tab (page 46)
Laminator tab (page 47)
Printer Select tab (page
Security Lock tab (page
Others tab (page 51)
48)
49)
39