Configuration Tab; Version Tab - DataCard SR200 User Manual

Configuration Tab

The Configuration tab displays the options installed in the
printer, if any.
The Enable the Settings area is available for administrator‐
level users. Use this option to print a card using settings that
are different from those saved in the printer. The changes
made using this method are not saved in the printer. After
this card is printed, the previous printer settings are
restored.
To enable temporary printer settings:
1.
Select Start from the Windows task bar.
2.
Open your PC's Printers or Devices and Printers window, following the steps for your
operating system.
3.
Right click the SR‐CP printer, and select Run as Administrator.
4.
Select Properties.
5.
In the General tab of the Properties dialog box, select
Printing Preferences.
6.
Click the Configuration tab.
7.
Select the box under Enable the settings.
8.
Select the Print tab and click Settings to change
settings for the next card to be printed.

Version Tab

The Version tab shows the build version of the printer driver.
Your service provider might ask you for this information.
SR200 & SR300 Card Printers and LM200 & LM300 Laminators User's Guide 37