Printing Preferences
The Printing Preferences dialog box contains the Setup, Print, Encode, Laminate, Configuration,
and Version tabs. Use the settings in these tabs to customize your card printer and laminator
operation.
To view or change Printing Preferences:
1.
Select Start from the Windows task bar.
2.
Open your PC's Printers or Devices and Printers window,
following the steps for your operating system.
3.
Locate the Datacard card printer icon.
The printer driver must be installed for the printer icon
to be present.
The default name of the SR200 or SR300 card printer is
SR‐CP U1 (or SR‐CP LAN, if a network printer). The name of your printer might be
different.
4.
Right‐click the printer icon and select Printing Preferences from the pop‐up menu. The
Printing Preferences dialog box opens.
5.
Click to select the desired tabs and make any desired changes, as described below.
6.
Click OK or Apply to save the settings, or Cancel to close the Printing Preferences window
without saving any changes.
Setup Tab
Use the Setup tab to specify the card orientation and
number of copies (your ID software might specify these
settings, which override the Setup tab). You can also
specify whether the printer will turn over the card after
it is picked, for printers with two‐sided printing
capability.
The Setup tab includes the Save and Load buttons.
Refer to "Saving Settings" on page 28 and "Loading
Settings" on page
for use with additional SR200 & SR300 printers.
SR200 & SR300 Card Printers and LM200 & LM300 Laminators User's Guide
28 to save and load printer settings
27