The Front And Right Side Of The Card Printer - DataCard SR200 User Manual

The Front and Right Side of the Card Printer

LCD Panel
Door Latch
Printer Door
Power Switch
Card Hopper
Reject Card Slot
Fan Filter and Cover
Port for Cable Lock
Lift Area
SR200 & SR300 Card Printers and LM200 & LM300 Laminators User's Guide
Displays the printer and laminator status and any messages. Use
to view printer and laminator settings, change some settings, and
perform some printer functions. Refer to "Card Printer LCD Panel"
on page 6.
Slide the latch up to open the printer door.
Open the door to access the ink ribbon and retransfer film
cartridges.
Press the switch to power on the printer.
Load blank cards into the card hopper and attach to the card
printer here. Consists of the hopper and hopper cover.
Cards for which the printer issued an error are ejected here.
Open to clean the fan filter and maintain card quality.
Attach an optional cable lock in this location.
Use this area to lift the printer when carrying it.
3