Retransfer Tab - DataCard SR200 User Manual

temperature drops if the printer goes to sleep. Select Disable to keep the heat roller(s) at
operating temperature, even when cards are not being printed.
If a laminator is installed, the HR Control setting also affects the laminator heat roller. The
roller(s) return to operating temperature when the next card is printed. The default is
Enable.
You can view this setting on the LCD panel (refer to the Heat Roller menu option in the
"Using the LCD Panel Menus" on page
Monitor (refer to "Laminator Tab" on page
Others, including:

A control to enable or disable the LCD display buzzer.

A control to set the LCD display contrast.

A control to set the LCD display mode.

A control to change the LCD display counter. Select the type of counter to be displayed on

the LCD panel.
For a description of the five types of counter, refer to the Property Tab on page

Retransfer Tab

Use the Retransfer tab to specify how images are moved from the retransfer film onto the cards.
The Retransfer tab displays the:
Front Side matrix and a Back Side matrix for setting the

retransfer speed and temperature. Click a square to select
the temperature setting.
UV Speed slider for setting the speed of the retransfer

heat roller (card front and back) when UV ink is used.
Card Type (read‐only). Use the Media Setting tab (page

to specify the card type being used.
Tips for Success
The transfer power to the card gets stronger towards the upper right, but the card becomes

more distorted due to the heat.
Changing the retransfer temperature on one card side also affects the temperature on the

other side of the card.
The recommended range of values depends on the type of card being used. Use the Media

Setting tab to specify the card type with the Media Setting tab. (Refer to page
instructions.)
SR200 & SR300 Card Printers and LM200 & LM300 Laminators User's Guide
51), and on the Laminator tab of the Status
47).
44)
46.
44 for
43