Vlan Port Settings - Planet Networking & Communication WGSW-24010 User Manual

10/100/1000mbps 24-port + 1 mini-gbic managed gigabit ethernet switch
Hide thumbs Also See for WGSW-24010:
Table of Contents

Advertisement

The VLAN Membership page is divided into the following sections:
• VLAN Membership Configuration
• VLAN Port Membership Table
VLAN Membership Configuration
The VLAN Membership section contains parameters for assigning VLAN membership to ports. The section contains the
following fields:
• Show VLAN -- Lists and displays specific VLAN information according to VLAN ID or VLAN name.
• VLAN Name -- The user-defined VLAN name.
• Status -- The VLAN type. Possible values are:
• Dynamic -- The VLAN was dynamically created through GVRP.
• Static -- The VLAN is user-defined.
• Default -- The VLAN is the default VLAN.
• Unauthorized Users -- Enables or disables unauthorized users from accessing a VLAN.
• Remove VLAN -- When selected, removes the VLAN from the VLAN Membership Table.
VLAN Port Membership Table
The VLAN Port Membership Table contains a Port Table for assigning ports to VLANs. Ports are assigned VLAN
membership by toggling through the Port Control settings. Ports can have the following values:
Port Control
Definition
T
The interface Is a member of a VLAN. All packets forwarded by the interface are tagged. The packets
contain VLAN information.
U
The interface is a VLAN member. Packets forwarded by the interface are untagged.
F
The interface is denied membership to a VLAN.
Blank
The interface is not a VLAN member. Packets associated with the interface are not forwarded.
?
Ports which are LAG members are not displayed in the VLAN Port Membership Table.
Note
:
The VLAN Port Membership Table displays the ports and the ports states, as well as LAGs.

VLAN Port Settings

The VLAN Port Settings page contains fields for managing ports that are part of a VLAN. The port default VLAN ID (PVID)
is configured on the VLAN Port Settings page. All untagged packets arriving to the device are tagged by the ports PVID.
To open VLAN Membership screen perform the folling:
1.
Click Switch -> VLAN -> VLAN Port Settings
2.
The VLAN Port Settings screen is displayed as in Figure 3-63
Figure 3-62 VLAN Membership screen
234

Advertisement

Table of Contents
loading

Table of Contents