Table of Contents
Advertisement
4. WEB CONFIGURATION
Besides the console interface, WGSW-24010 can be configured through an Ethernet connection, make sure
the manager PC must be set on same the IP subnet address with the switch. For example, if you have
changed the default IP address of the Switch to 192.168.16.234 with subnet mask 255.255.255.0 via console,
then the manager PC should be set at 192.168.16.x (where x is a number between 2 and 254) with subnet
mask 255.255.255.0. Or you can use the factory default IP address 192.168.0.100 to do the relative
configuration on manager PC.
Use Internet Explorer 5.0 or above Web browser. Enter IP address http://192.168.0.100 (the factory-default IP
address or that you have changed via console) to access the Web interface.
When the following login screen appears, please enter the default username "admin" and password "admin" (or the
username/password you have changed via console) to login the main screen of Switch. The login screen in Figure 3-13
appears.
Figure 3-13 Login screen
4.1 Manin Menu
After a successful login, the main screen appears, the main screen displays the port status and a list of System
section and the topics it provide. As showed in Figure 3-14.
175
Advertisement
Table of Contents
