Ip Addressing - Planet Networking & Communication WGSW-24010 User Manual

10/100/1000mbps 24-port + 1 mini-gbic managed gigabit ethernet switch
Hide thumbs Also See for WGSW-24010:
Table of Contents

Advertisement

4.2.4 IP Addressing

The IP Addressing page contains links for assigning interface and default gateway IP addresses, and defining ARP and
DHCP parameters for the interfaces.
The IP Addressing page contains links to the following topics:
• Default Gateway
• IP Interface Parameters
• DHCP IP Interface
• Domain Name System
• Default Domain Name
• Host Name Mapping
• ARP
Default Gateway
The Default Gateway page contains fields for assigning Gateway devices. Packets are forwarded to the default IP when
frames are sent to a remote network. The configured IP address must belong to the same IP address subnet of one of the
IP interfaces.
To open Default Gageway screen perform the folling:
1.
Click System -> IP Addressing -> Default Gateway
2.
The Default Gateway screen is displayed as in Figure 3-26.
The page includes the following fields:
• Default Gateway -- The Gateway device IP address.
• Remove -- Removes Gateway devices from the Default Gateway drop-down list, when selected
IP Interface Parameters
The IP Interface Parameters page contains fields for assigningIP parameters to interfaces.
Figure 3-26 Default Gateway screen
190

Advertisement

Table of Contents
loading

Table of Contents