Table of Contents
Advertisement
§
long — Specifies a long timeout value.
§
Short — Specifies a short timeout value.
Default Configuration
The default port timeout value is long.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example assigns an administrative LACP timeout for port g8 to a long timeout value.
Console (config)# interface ethernet g8
Console (config-if)# lacp timeout long
3.11.4 show lacp ethernet
The show lacp ethernet privilege EXEC command displays LACP information for Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics | protocol-state]
§
Interface — Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to display LACP statistics information.
Console# show lacp ethernet e1 statistics
Port e1 LACP Statistics:
LACP PDUs sent:2
LACP PDUs received:2
3.11.5 show lacp port-channel
The show lacp port-channel privileged EXEC command displays LACP information for a port-channel.
Syntax
show lacp port-channel [port_channel_number]
§
port_channel_number — The port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
76
Advertisement
Table of Contents
