Planet Networking & Communication WGSW-24010 User Manual page 203

The page includes the following fields:
• Host Name -- Contains a Host Name list. Host Name are defined in the Add Host Name Mapping page. Each
host provides up to eight IP addresses. The field values for the Host Name field are:
• IP Address (X.X.X.X) -- Provides up to eight IP address that are assigned to the specified host name.
• Type -- The IP address type. The possible field values are:
• Dynamic -- The IP address was created dynamically.
• Static -- The IP address is a static IP address.
• Remove Host Name Mapping -- When checked, removes the DNS Host Mapping.
ARP
The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. The
static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and used to
translate IP addresses to MAC addresses.
To open Host Name Mapping screen perform the folling:
1. Click System -> IP Addressing -> ARP
2. The ARP screen is displayed as in Figure 3-31.
Figure 3-30 Host Name Mapping screen
195