Vlan Port - Planet Networking & Communication WGSW-48000 User Manual

4.4.5 VLAN Port

This page is used for configuring the Managed Switch port VLAN. The VLAN per Port Configuration page contains fields for
managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Configuration page.
All untagged packets arriving to the device are tagged by the ports PVID.
The page includes the following fields:
Object
• PVID
• Protected Port
• Drop Non 1Q Frame
• VLAN Ingress Filter
Figure 4-4-3 VLAN Port
Description
The port default VLAN ID (PVID) is configured on the VLAN Port screen. All
untagged packets arrive to the device are tagged by the ports PVID.
When the ports specified as 'Protected Port', they can not forward traffic to each
other. Only the ports that are not specified as 'Protected Port' can forward traffic
to and from the protected ports respectively.
When enabled, any Non-1Q ingress frame will be dropped by this port.
Enable ingress filtering for a port by checking the box. This parameter affects
VLAN ingress processing. If ingress filtering is enabled and the ingress port is not
a member of the classified VLAN of the frame, the frame is discarded.
By default, ingress filtering is disabled (no checkmark).
64
User's Manual of WGSW-48000