Table of Contents
Advertisement
To open Etherlink Statistics screen perform the folling:
1.
Click Statics/RMON -> Table Views -> Etherlink Statistics
2.
The Etherlink Statistics screen is displayed as in Figure 3-76
The page includes the following fields:
• Interface -- Specifies whether statistics are displayed for a port or LAG.
• Refresh Rate -- Amount of time that passes before the interface statistics are refreshed.
• Frame Check Sequence (FCS) Errors -- Number of FCS errors received on the selected interface.
• Single Collision Frames -- Number of single collision frames received on the selected interface.
• Multiple Collision Frames -- Number of multiple collisions frames received on the selected interface.
• Single Quality Error (SQE) Test Errors -- Number of SQE test errors received on the selected interface.
• Deferred Transmissions -- Number of deferred transmissions on the selected interface.
• Late Collisions -- Number of late collisions received on the selected interface.
• Excessive Collisions -- Number of excessive collisions received on the selected interface.
• Internal MAC Transmit Errors -- Number of internal MAC transmit errors on the selected interface.
• Carrier Sense Errors -- Number of carrier sense errors on the selected interface.
• Oversize Packets -- Number of oversized packet errors on the selected interface.
• Internal MAC Receive Errors -- Number of internal MAC received errors on the selected interface.
• Single Quality Errors (SQE) Test Errors -- The amount of SQE test errors received on the selected interface.
• Receive Pause Frames -- Number of received paused frames on the selected interface.
• Transmitted Paused Frames -- The number of Pause Frames transmitted from the selected interface.
GVRP Statistics
The GVRP Statistics page contains device statistics for GVRP.
To open GVRP Statistics screen perform the folling:
1.
Click Statics/RMON -> Table Views -> GVRP Statistics
Figure 3-76 Etherlink Statistics screen
251
Advertisement
Table of Contents
