Show Qos Interface - Planet Networking & Communication WGSW-24010 User Manual

10/100/1000mbps 24-port + 1 mini-gbic managed gigabit ethernet switch
Hide thumbs Also See for WGSW-24010:
Table of Contents

Advertisement

Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
When configuring the priority-queue out num-of-queues command, the weighted round robin (WRR) weight ratios are
affected because there are fewer queues participating in WRR.
Example
The following example sets queue 7, 8 to be an EF queue.
Console (config)# priority-queue out num-of-queues 2

3.17.6 show qos interface

The show qos interface user EXEC command displays interface QoS data.
Syntax
show qos interface [ethernet interface-number | vlan vlan-id | port-channel number] [buffers | queuing | policers |
shapers]
§
ethernet interface-number — Ethernet port number.
§
vlan vlan-id — VLAN number.
§
port-channel number — Port-channel.
buffers — Displays buffer setting for the interface queues. For gigabit Ethernet interfaces, the queue depth for
§
each of the 8 queues and the thresholds for the WRED/Tail Drop are displayed. For 10/100 interfaces the minimum
reserved settings are displayed.
§
queuing — Displays the queue strategy (WRR or EF), the weight for WRR queues, the CoS to queue map and the
EF priority.
§
shapers — Displays the specified interface shaper and the shaper for the queue on the specified interface.
policers — Displays all the policers configured for this interface, their setting, and the number of policers currently
§
unused.
Default Configuration
For VLAN interface only the policers option is relevant.
If no keyword is specified with the show qos interface command, the port QoS mode, default CoS value, DSCPto-
DSCP-mutation map (if any) attached to the port, and policy map (if any) attached to the interface are displayed. If a
specific interface is not specified, the information for all interfaces is displayed.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays output from the show qos interface ethernet e1 buffers command.
Console# show qos interface ethernet e1 buffers
Ethernet e1
Notify Q depth:
qid Size
1
125
2
125
3
125
4
125
5
125
6
125
7
125
92

Advertisement

Table of Contents
loading

Table of Contents