Vlan Commands Set - Planet Networking & Communication WGSW-2620P User Manual

port group
[group-number]
[port-list] lacp [on |
off] workp [work
ports]
no port group
[group-number]
lacp [on | off] workp
[work ports]
port group
[group-number]
activityport
[port-list]

3.3.2.4 VLAN Commands Set

Commands
Vlan datatbase
Add trunking group.
Global
Use the no form of this
configuratio
command to delete
n mode
trunking group.
Global
Set trunking group port
configuratio
active
n mode
Command
Description
Level
Privileged
To enter the VLAN
EXEC
configuration interface
mode
LACP:
Switch (config)#
port group 1 1-4
lacp on workp 2
Disable
Trunk without
LACP:
Switch (config)#
port group 1 1-4
lacp off workp 4
Switch (config)#
port group 3
activityport 2-4
Trunk.1 Lacp:
Enable
Check OK!
NEW: 2 4
Update finished!!
Defaults Example
Switch# vlan
database
Switch(vlan)#