Tacacs-Server Key; Tacacs-Server Timeout; Tacacs-Server Source-Ip - Planet Networking & Communication WGSW-24010 User Manual

3.25.2 tacacs-server key

The tacacs-server key command in global configuration mode sets the authentication encryption key used for all
TACACS+ communications between the device and the TACACS+ daemon. To disable the key, use the no form of this
command.
Syntax
tacacs-server key key-string
no tacacs-server key
§ key-string — Specifies the authentication and encryption key for all TACAS communications between the router
and the TACACS server. This key must match the encryption used on the TACACS daemon. (Range: Up to 160
characters)
Default Configuration
Empty string
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the authentication encryption key.
Console (config)# tacacs-server key abc-s

3.25.3 tacacs-server timeout

The tacacs-server timeout command in global configuration mode sets the timeout value. To restore the default, use the
no form of this command.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
§ timeout — Specifies the timeout value in seconds. (Range: 1 - 1000)
Default Configuration
5 seconds
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the timeout value as 300.
Console (config)# tacacs-server timeout 300

3.25.4 tacacs-server source-ip

The tacacs-server source-ip command in global configuration mode specifies the source IP address that will be used for
the communication with TACACS servers. To return to default, use the no form of this command.
143