rndCommunityAccess super
3.20.8 show snmp
The show snmp privileged EXEC command displays the SNMP status.
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP communications status.
Console# show snmp
Community-String
-------------------------
public
private
private
OOB management stations
Community-String
-------------------------
private
Traps are enabled.
Authentication trap is enabled.
Trap-Rec-Address
192.122.173.42
OOB trap receivers
Trap-Rec-Address
176.16.8.9
System Contact: Robert
System Location: Marketing
3.21 Spanning-Tree Commands
3.21.1 spanning-tree
The spanning-tree global configuration command enables spanning-tree functionality. To disable spanning-tree
functionality, use the no form of this command.
Community-Access
----------------------------
read only
read write
read write
Community-Access
----------------------------
read write
Trap-Rec-Community
public
Trap-Rec-Community
public
IP address
------------------
All
172.16.1.1
172.17.1.1
IP address
------------------
176.16.8.9
Version
2
Version
2
115