Table of Contents
Advertisement
F
Forbidden.
Blank
The port is not attached to a Multicast router or switch.
Attaching a Port to a Multicast Router or Switch
1.
Define the VLAN ID field.
2.
Select a port in the Ports table, and assign the port a value.
3.
Click Apply Changes.
The port is attached to the Multicast router or switch.
Attaching a LAG to a Multicast Router or Switch
1.
Define the VLAN ID field.
2.
Select a port in the LAGs table, and assign the LAG a value.
3.
Click Apply Changes.
The LAG is attached to the Multicast router or switch.
IGMP Snooping
The IGMP Snooping page contains fields for adding IGMP members.
To open IGMP Snooping screen perform the folling:
1.
Click Switch -> Multicast Support -> IGMP Snooping
2.
The IGMP Snooping screen is displayed as in Figure 3-72
The page includes the following fields:
• VLAN ID -- Specifies the VLAN ID.
• IGMP Snooping Status -- Enables or disables IGMP snooping on the VLAN.
• Auto Learn -- Enables or disables Auto Learn on the device.
Figure 3-72 IGMP Snooping screen
246
Advertisement
Table of Contents
