Table of Contents
Advertisement
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command forbids dynamic VLAN creation from the interface. The creation or modification of dynamic VLAN
registration entries as a result of the GVRP exchanges on an interface are restricted only to those VLANs for which static
VLAN registration exists.
Example
The following example disables dynamic VLAN creation on port g8.
Console (config)# interface ethernet g8
Console (config-if)# gvrp vlan-creation-forbid
3.8.5 gvrp registration-forbid
The gvrp registration-forbid interface configuration command de-registers all dynamic VLANs, and prevents dynamic
VLAN registration on the port. To allow dynamic registering for VLANs on a port, use the no form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Default Configuration
Dynamic registering and deregistering for each VLAN on the port is allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how default dynamic registering and deregistering is forbidden for each VLAN on port g8.
Console (config)# interface ethernet g8
Console (config-if)# gvrp registration-forbid
3.8.6 gvrp max-vlan
The gvrp max-vlan command in global configuration mode configures the maximum number of VLANs when GVRP is
enabled . To return to default, use the no form of this command.
Syntax
gvrp max-vlan number
no gvrp max-vlan
§
number — Maximum number of VLANs when GVRP is enabled
Default Configuration
256
Command Mode
Global configuration mode
User Guidelines
The size will be effective after reboot.
The maximum number of GVRP VLANs includes all the VLANs participating in GVRP operation - no matter whether they
are static or dynamic VLANs.
60
Advertisement
Table of Contents
