Show Sntp Status - Planet Networking & Communication WGSW-24010 User Manual

Examples
Console# show sntp configuration
Polling interval: 7200 seconds.
MD5 Authentication keys: 8, 9
Authentication is required for synchronization.
Trusted Keys: 8,9
Unicast Clients Polling: Enabled.
Server Polling
----------- -----------
176.1.1.8 Enabled
176.1.8.179 Disabled
Broadcast Clients: Enabled
Broadcast Clients Poll: Enabled
Broadcast Interfaces: 1/1, 1/3
OOB SNTP servers
Server Polling
----------- ------------
10.1.1.91 Enabled
Broadcast Clients: Enabled
Broadcast Clients Poll: Enabled
Broadcast Interfaces: 1/1, 1/3

3.5.17 show sntp status

The show sntp status Privileged EXEC command shows the status of the Simple Network Time Protocol (SNTP),
Syntax
show sntp status
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Preference
----------- -----------------
176.1.1.8 Primary
176.1.8.179 Secondary
Encryption Key
----------------------
9
Disabled
Encryption Key
----------------------
9
Status Last response
----------- ----------------------
Up AFE252C1.6DBDDFF2
Unknown AFE21789.643287C9
Offset Delay
[mSec]
----------- ------------
7.33 117.79
8.98 189.19
[mSec]
39