Show Dot1X - Planet Networking & Communication WGSW-24010 User Manual

c
onsole config-if(Config-VLAN)# dot1x timeout supp-timeout 3600

3.29.12 show dot1x

The show dot1x privileged EXEC command displays 802.1X status for the switch or for the specified interface.
Syntax
show dot1x [ethernet interface]
§ interface —The full syntax is: unit/port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays 802.1X status for the switch.
Console# show dot1x
Interface Admin Mode
------------- -----------------
1/g1 Auto
1/g2 Auto
1/g3 Auto
1/g4 Force-auth
Console# show dot1x ethernet g3
Interface Admin Mode
1/g3 Auto
State: held
Quiet period: 60
Tx period: 30
Max req: 2
Login Time: n/a
Last Authentication: n/a
MAC Address: 0008.7832.9878
Authentication Method: Remote
Termination Cause: Supplicant logoff
The following table describes the significant fields shown in the display:
Field
Interface
Admin mode
Oper mode
Oper Mode
----------------
Authorized
Authorized
Unauthorized
Authorized
Oper Mode
Unauthorized
Description
The interface number.
The admin mode of the port. Possible values are: Force-auth, Force-unauth, Auto
The oper mode of the port. Possible values are: Authorized, Unauthorized.
Reauth Reauth
Control Period
-------------- -------------
Ena 3600
Ena 3600
Ena 3600
Dis 3600
Reauth Reauth
Control Period
Ena 3600
Username
-----------------
Bob
John
Clark
n/a
Username
Clark
169