Table of Contents
Advertisement
Default Configuration
This command has no default configuration.
Command Mode
All command modes
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface Configuration mode to User EXEC mode.
Console(config-if)# exit
Console(config)# exit
Console#
3.26.6 exit(EXEC)
The exit user EXEC command closes an active terminal session by logging off the device.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode
User Guidelines
There are no user guidelines for this command.
Example
The following example closes an active terminal session.
Console> exit
3.26.7 end
The end global configuration command ends the current configuration session and returns to the privileged command
mode.
Syntax
end
Default Configuration
This command has no default configuration.
Command Mode
All Command modes
User Guidelines
There are no user guidelines for this command.
Example
The following example ends the current configuration session and returns to the previous command mode.
Console (config)# end
Console #
147
Advertisement
Table of Contents
