Show Privilege; Vlan Commands; Vlan Database; Vlan - Planet Networking & Communication WGSW-24010 User Manual

3.26.13 show privilege

The show privilege user EXEC command displays the current privilege level.
Syntax
show privilege
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the current privilege level.
Console# show privilege
Current privilege level is 15

3.27 VLAN Commands

3.27.1 vlan database

The vlan database global configuration command enters the VLAN configuration mode.
Syntax
vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the VLAN database mode.
Console (config)# vlan database
Console (config-vlan)#

3.27.2 vlan

Use the vlan interface configuration (VLAN) command to create a VLAN. To delete a VLAN, use the no form of this
command.
Syntax
vlan {vlan-range}
no vlan {vlan-range}
150