APPENDIX B
B.1 System Default configuration.
The following file is the factory default settings of WGSW-24010. Once you have to reset your WGSW-24010
configuration to default values, please upload the file to replace the running/startup/backup configuration.
no spanning-tree
interface range ethernet all
flowcontrol auto
exit
interface range ethernet all
mdix auto
exit
interface vlan 1
ip address 192.168.0.100 255.255.255.0
exit
management access-list Web_Mgt
permit vlan 1 service http
exit
username admin password 21232f297a57a5a743894a0e4a801fc3 level 15 encrypted
username guest password d41d8cd98f00b204e9800998ecf8427e encrypted
snmp-server community public
270