Web Configuration - Planet Networking & Communication MGSW-28240F User Manual

L2+ gigabit managed metro ethernet switch mgsw-mgsd series
Hide thumbs Also See for MGSW-28240F:
Table of Contents

Advertisement

This section introduces the configuration and functions of the Web-based management.
About Web-based Management
The Managed Switch offers management features that allow users to manage the Managed Switch from anywhere on the
network through a standard browser such as Microsoft Internet Explorer.
The Web-Based Management supports Internet Explorer 7.0. It is based on Java Applets with an aim to reduce network
bandwidth consumption, enhance access speed and present an easy viewing screen.
By default, IE7.0 or later version does not allow Java Applets to open sockets. The user has to
explicitly modify the browser setting to enable Java Applets to use network ports.
The Managed Switch can be configured through an Ethernet connection, making sure the manager PC must be set on the
same IP subnet address with the Managed Switch.
For example, the default IP address of the Managed Switch is 192.168.0.100, then the manager PC should be set at
192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
If you have changed the default IP address of the Managed Switch to 192.168.1.1 with subnet mask 255.255.255.0 via console,
then the manager PC should be set at 192.168.1.x (where x is a number between 2 and 254) to do the relative configuration on
manager PC.

4. WEB CONFIGURATION

Figure 4-1-1: Web Management
48
User's Manual of MGSW-MGSD Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgsw-24160fMgsd-10080f

Table of Contents