Radius Accounting Settings - D-Link DAS-3626 User Manual

RADIUS Accounting Settings

The Accounting feature of the switch uses a remote RADIUS server to collect information regarding events occurring
on the switch. The following is a list of information that will be sent to the RADIUS server when an event triggers the
switch to send these informational packets.
•
Account Session ID
•
Account Status Type
•
Account Terminate Cause
•
Account Authentication
•
Account Delay Time
•
Account Session Time
•
Username
•
Service Type
•
NAS IP Address
•
NAS Identifier
•
Calling Station ID
There are three types of Accounting that can be enabled on the switch.
Network – When enabled, the switch will send informational packets to a remote RADIUS server when network
events occur on the switch.
Shell – When enabled, the switch will send informational packets to a remote RADIUS server when a user either logs
in, logs out or times out on the switch, using the console, Telnet, or SSH.
System - When enabled, the switch will send informational packets to a remote RADIUS server when system events
occur on the switch, such as a system reset or system boot.
Remember, this feature will not work properly unless a RADIUS Server has first been configured. This RADIUS server
will format, store and manage the information collected here.
To view this window, click Security > Access Authentication Control > RADIUS Accounting Settings as shown
below:
DAS-3626 VDSL2 Switch User Manual
Figure 143. RADIUS Accounting Settings menu
121