Table of Contents
Advertisement
Configuring Printing Protocols and WSD Functions
Configure the protocols that are used for printing documents from a networked computer.
●
For more information about the basic operations to be performed when setting the machine from the
Remote UI, see
Setting Up Menu Options from Remote UI(P. 445) .
1
Start the Remote UI and log in to System Manager Mode.
UI(P. 436)
2
Click [Settings/Registration] on the Portal page.
3
Click [Network Settings].
4
Configure printing protocols.
Configuring LPD or RAW
1
Select [LPD Settings] or [RAW Settings]
2
Configure the settings as necessary.
[Use LPD Printing]
Select the check box to print via LPD. When not using LPD printing, clear the check box.
[Use RAW Printing]
Select the check box to print via RAW. When not using RAW printing, clear the check box.
[RX Timeout]
Set a value as the restart wait time for data reception. If data reception does not resume within the set
time, printing is canceled.
3
Click [OK].
Setting Up
Remote UI Screen(P. 437)
[Edit].
40
6C6U-00S
Starting Remote
Advertisement
Table of Contents
