Faxing: Advanced Operations; Sending A Fax At A Later Date And Time; The Document Feeder - Konica Minolta FAX 9820 User Manual

HOME

Faxing: Advanced Operations

Your can program your machine up to three days
in advance to send documents at a specified date
and time.
You can send one delayed fax at a time either
from the document feeder or from memory. Refer
to the table below to decide which method you
want to use.
Delayed TX Features
and Limitations
Number of locations
Number of delayed faxes
loaded into your machine
Konica FAX 9820 can be used for
other transmissions while a
delayed fax is waiting to be sent?
Note: The Konica FAX 9820 sends from memory by
default. To change the default setting, see "Mem./
Feeder SW.", page 59.
From From
Feeder Memory
One Multiple
One Konica FAX
9820: up to 20
at one time
No Yes
1 Load your documents.
2 Press the Select Function key.
3 Press the 1/Delayed TX One Touch key. The
display shows DELAYED TX and today's date.
4 If the transmission is to occur on the same day,
skip to step 6. Otherwise, press the No
display shows PRG. START DATE 0-9.
5 Using the numeric keypad, enter the date you wish
the transmission to begin—up to three days in
advance.
Press the Yes 3 key. The display shows PRG.
6
START TIME 0-9.
7 Using the numeric keypad, enter the time you wish
the transmission to begin, in 24-hour format—8:00
is 08:00; 8:00 is 20:00.
AM PM
Press the Yes 3 key. The display shows BROAD-
8
CAST/MEMORY TX
4
key. The