Configuration Report - Konica Minolta FAX 9820 User Manual

HOME
The date, time and duration (S, R-TIME) of each
transmission or reception.
The name or telephone number of the fax machine
you were communicating with (DISTANT STATION
ID). If you were sending a fax, the telephone
number or the Location ID is printed. If you were
receiving a fax, the remote fax machine's Personal
ID or its telephone number is printed.
The communication mode used for each transmis-
sion or reception.
The number of pages sent or received.
The result of each communication.
Service codes. Be sure to report these diagnostic
codes if you contact your Authorized Konica
Dealer about communication problems.
Note: This report does not list messages that were re-
ceived without errors.
Use this report to confirm the results of a multiple-
location transmission (broadcast). Information pro-
vided on this report includes:
The date and time at which the broadcast started.
The total amount of time used to complete the
broadcast.
For each location, the Location ID, the number of
pages sent and the result of the communication.
This report provides a complete listing of all of the
telephone numbers programmed into your
machine's One Touch keys, Auto Dial codes and
groups. The information includes:
The Location ID and main fax number for each
One Touch key and Auto Dial code.
The alternate number (OR) for each One Touch key.
The One Touch Parameter settings for each One
Touch key (PRM. ECHO).
A listing of all of the One Touch keys and Auto
Dial codes included in each group.
The configuration report provides a list of the cur-
rent operational settings of your machine. The in-
formation includes:
The current settings of all user functions (except
for One Touch Parameter settings, which appear in
the telephone directory).
The Sender ID (ID=), TSI/CSI (TEL NO.), and call
back number currently programmed into your
machine.