Signal Tones - Konica Minolta FAX 9820 User Manual

HOME
from the image drum. See page 70.
Your Konica FAX 9820 makes a number of sounds
to inform you of specific conditions.
Key Select tone:
time you press a key.
If you press a wrong or inappropriate key,
Error tones:
your machine emits three short beeps. If it experiences
a problem during communications, it emits three long
beeps. Press the Stop key to turn the error tone off,
then print a Message Confirmation Report to check the
source of the problem—to do this, press the Copy key
twice with no documents loaded.
Voice Request tone:
you or the person at the remote fax machine may
initiate a voice request. When the person at the re-
mote machine either initiates or answers your voice
request, your Konica FAX 9820 emits a repetitive
warbling sound.
End of Session tone:
fax session, your machine emits a short beep to in-
form you that there were no errors or problems in the
communication.
This is a short beep that occurs each
During a fax session, either
At the end of every successful
Off-Hook Alarm tone: If it is equipped with the optional
handset, and if the handset is left off the hook, your
Konica FAX 9820 emits an intermittent warbling sound. To
turn off the sound, hang up the handset and press the
Stop key.