Table of Contents
Advertisement
HOME
1
Press the Select Function key.
2
Press the 9/User Program One Touch key.
3
On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
Press the Yes 3 key until the display shows the dial
4
parameter you want to change.
5
Repeatedly press the No
want appears in the display.
Press the Yes 3 key to confirm your selection. The
6
name of the next dial parameter setting appears in
the display.
7
Press the Select Function key to finish.
In many cases, service function settings greatly
change the way your machine operates. To change
any of these settings, contact your Authorized Konica
Dealer.
4
key until the setting you
LONG DOC. SCAN: Normally the machine does not
scan documents longer than 14 inches (360 mm).
When this function is on, your machine can scan and
transmit documents of any length for up to one hour.
MDY/DMY: This function specifies how the machine
displays and prints the date: month/day/year or day/
month/year.
TIME/DATE PRINT: This function specifies how the
time and date are printed on the fax messages you
transmit. Available settings are: do not print date and
time, print date and time at the top of the first page
only, and print date and time at the top of every page.
TSI PRINT: When this function is on, the phone
number of the sending fax machine prints at the top
of each page of the message.
NO TONER MEM.RX: When this function is on, your
machine automatically receives messages in memory
when it is low on toner.
Advertisement
Table of Contents
