Konica Minolta FAX 9820 User Manual page 83

HOME
If your machine displays "TONER LOW" or
"REPLACE TONER CART.," replace the toner
cartridge with a new one soon. If print density is high
enough, you can continue to to use the toner
cartridge without replacing it until print quality
becomes unacceptable. Keep in mind that if you don't
replace the cartridge soon, there is a risk that a fax will be
unreadable when it prints using an empty cartridge.
If the print density becomes low even before your
machine displays "TONER LOW" or "REPLACE
TONER CART.," gently wipe the lens surface of the
LED array (see Step 8). If the print density does not
improve, replace the toner cartridge.
Warning: Be careful when handling the toner cartridge.
Do not let toner spill on your clothing or other porous ma-
terials. Use cold water to clean up spilled toner; hot water
causes the stain to set.
1 Lift the document table into an upright position.
2 Push in the cover release buttons on the side of the
copy stacker until you hear a click. Lift the copy
stacker.
3 Pull the blue lever on the old toner cartridge all the
way toward you. Carefully pull the old toner cartridge
out of the image drum unit. Dispose of it in the plastic
bag you received with your new cartridge
4 Remove the new toner cartridge from its package and
gently shake it from side to side to distribute the
toner. Then carefully peel the white plastic tape from
the bottom of the toner cartridge.