Interrupt Copying; I Nterrupt Copying - Konica Minolta 7022 Instruction Manual

Interrupt Copying

Use the Interrupt mode to interrupt copying in progress to perform a simple job. When
interrupt copying is completed, the settings for the initial job restore automatically and
the Basic Screen displays.
Interrupt copying is available when the copier is performing the following operations:
• Continuously printing the image stored in memory
• Scanning the originals into memory
• Scanning the originals into memory while printing in Reserve mode
The Interrupt mode cannot be selected with the following copier conditions:
• The Basic Screen is not displayed.
• The Call for Service message displays or a paper misfeed occurs.
1.
Press [INTERRUPT] on the control panel.
The [INTERRUPT] LED turns on and the SETTING indicator on the Basic Screen
changes to INTERRUPT.
The timing to enter the Interrupt mode varies according to the job in
progress on the machine when [INTERRUPT] is pressed.
See the following page.
In Reserve mode, pressing [INTERRUPT] before the copier finishes
scanning the reserve job originals clears the settings selected for the
reserve job.
For details of Reserve mode, see p. 3-25 to p. 3-26.
3-38
DATA
HELP
1 2
CHECK
4 5
APPLICATION
7 8
OUTPUT
0
CLEAR QTY.
AUTO RESET
HINT
DETAILS
FAX COPY
3
POWER SAVER
ON / OFF
INTERRUPT
6
STOP/CLEAR
9
START