Reverse the Second Side in 1-2 Mode (Flip Side 2) (continued)
4.
Touch the desired binding type key.
Touch OK to restore the Special Original Screen.
5.
Touch OK on the Special Original Screen to return to the Application
Selection Screen.
6.
Touch OK to return to the Basic Screen.
7.
Select additional copying features, as desired.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
When selecting 2-1 Flip Side 2 mode, use RADF to scan originals.
• See p. 3-2 to p. 3-6 for details on positioning originals.
• Use RADF store mode (p. 3-22 to p. 3-24) when the original count
exceeds 50.
10.
Press [START].
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
HINT
HINTS
CAUTION
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Image Insert
Dual Page
Mixed
Original
Folded
Original
Non-Standard
Size
Flip Side 2
Text/Photo
Enhance
Reverse
Image
Repeat
8
Applications
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Reduce &
Shift
Non-Image
Area Erase
Stamp
Overlay
8-33