Output Mode for Machine without Finisher (continued)
2.
Press [OUTPUT] on the control panel.
The Output Mode popup menu will be displayed.
3.
Select the desired output mode.
Touch the desired output mode key to highlight it.
To select Stack mode, deselect all the keys.
4.
Touch OK.
The Basic Screen will be restored.
5.
Select additional copy conditions, as desired.
6.
Enter the desired print quantity from the control panel keypad.
• See p. 9-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
7.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
See p. 3-2 to p. 3-6 for details on positioning originals.
8.
Press [START].
Press [STOP/CLEAR] to suspend the scanning or printing job.
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
3-30
DATA
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
HINTS
HINT
CAUTION
FAX
1
2
3
INTERRU
4
5
6
7
8
9
0
STAR
CLEAR QTY.