Konica Minolta 7022 Instruction Manual page 256

[12] Memory Switch (continued)
[5] RADF frame erasure
Sets the amount of frame erase when using the RADF.
Options: None, 1mm/ 2mm/ 3mm/ 4mm/ 5mm.
[6] Auto tray switch
During a copy job when ATS is on and multiple paper trays are loaded with the same
size paper, the machine will automatically switch to another tray when the initial tray
runs out of paper. Refer to memory switches 9 through 13 to activate this feature for
each tray.
[7] Platen APS
This feature allows the machine to automatically detect the size of the original placed
on the glass and select the same size copy paper. Refer to switches 9 through 13 to
activate this feature for each tray.
[8] RADF APS
This feature allows the machine to detect the size of the original fed through the RADF.
Refer to switches 9 through 13 to activate this feature for each tray.
[9] ATS/APS (Bypass)
This setting activates ATS and APS (platen and RADF) for Multi-sheet bypass.
[10] ATS/APS SW (Tray 1)
This setting activates ATS and APS (platen and RADF) for Tray 1.
[11] ATS/APS SW (Tray 2)
This setting activates ATS and APS (platen and RADF) for Tray 2.
[12] ATS/APS SW (Tray 3)
This setting activates ATS and APS (platen and RADF) for Tray 3.
[13] ATS/APS SW (Tray 4)
This setting activates ATS and APS (platen and RADF) for Tray 4.
[14] Platen AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is placed on the platen
glass.
[15] RADF AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is fed from the RADF.
[16] Staple mode reset
When copying in the sort/staple mode, this setting allows the machine to automatically
reset to non-staple mode when the job in progress is completed.
[17] Key click sound
When this feature is Low or High, the machine activates a buzzer sound when the touch
sensitive screen is touched or any key is pressed. This confirms the machine
recognition of the selection.
11-44