Konica Minolta 7022 Instruction Manual page 233

(3) Touch DEL. to delete the input character from
the last.
(4) Touching CANCEL on the Name Input Screen
will clear all the input characters.
(5) To change the existing name, touch DEL. to
delete it and enter the new name.
6 Touch OK on the Name Input Screen to return to
the EKC Data Input Screen.
7 Touch Limit. Limit key will be highlighted,
enabling you to immediately enter copy limit.
8 Enter a 6-digit copy limit for the ID No. using the
keypad on the control panel. The input copy limit
will be displayed on the right of the copy count.
NOTES:
1. If an invalid copy limit is entered, continue by
entering the valid 6-digit copy limit.
2. Entering "000000" signifies no copy limit.
3. The Clear key, though it clears copy count, does
not function on the EKC Data Input Screen.
9 Touch OK to complete the settings and return to
the EKC Setting Menu Screen.
When the same EKC password has been used for
another ID No., the Password Duplication Screen
will be displayed. To re-enter new password, touch
YES and return to the step 5. To create duplicate
password, touch NO, then touch OK.
NOTE:
It is possible to assign the same EKC password to
different ID Nos. Note, however, that the number of
copies will be counted only for the EKC password
with the smallest ID No. Copy count for the other ID
Nos. will not be monitored.
We recommend you do not use duplicate EKC password.
10 If other EKC setting changes are required, touch the desired key.
11 Touch RETURN to restore the Key Operator Mode Screen.
12 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[4] E.K.C. (Electronic Key Counter) (continued)
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.K.C.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
Key Operator
Mode
11-21